Skip to main content

PF Pay How-Tos, Tools & Help

How to start an event in PF Pay, fix Stripe reader connection errors, and keep your devices charged.

Starting at an Event

The below should be done when first logging in for an event.

What you Need

What to Do

  1. If PF Pay is already open to a previous event, log out.

  2. Hard close the app (swipe it fully closed, don't just minimize it).

  3. Reopen PF Pay.

  4. Enter your PF Pay code.

How to Connect Your Reader

  1. Place the Stripe reader you want to connect directly next to the iPad.

  2. Use the Hamburger Menu to open up the PF Pay menu.

  3. Under the Device Settings header, select the Settings button.

  4. On the Device Settings page, follow the instructions provided on the page to pair the device.

  5. Now you can move your reader to the ideal place to take a payment.

Troubleshooting Error Messages and Connection Issues

Note: Please do not delete the PF Pay app unless instructed by a PlayerFirst Support team member. PF Support Phone: (781) 722-0333

"Unable to Connect Reader"

What you'll see

What to do

Unable to Connect Reader: reader battery is too low

  1. Make sure your Stripe reader is on or awake: tap the button on the side.

  2. Plug your Stripe reader into a charging block or other USB-C charging device.

  3. Place the Stripe reader you want to connect directly next to the iPad.

  4. Go to the Shop screen, then to Settings, and tap Reader Search again to connect.

Note: Please do not delete the PF Pay app unless instructed by a PlayerFirst Support team member.

"Stripe Terminal Connection Error"

What you'll see

What to do

Stripe Terminal Connection Error pop-up

  1. Log out of the event on PF Pay.

  2. Hard close the app.

  3. Re-open the app.

  4. Log in to your event, and attempt to connect your Stripe device.

  5. After the error is received, go to Device Settings, and press the Refetch Token button.

  6. Attempt to connect your reader again.

NOTE: This error may also occur if you have poor wifi/cellular service. Learn how to check your connection strength HERE.

Stripe Reader is not connecting to my iPad

  1. Ensure the reader is turned on, and place it on top of the iPad.

  2. Plug in your Stripe Reader.

    • You will now see the reader's LED lights move from left to right and right to left to indicate that the reader is powered on but not yet connected to your point of sale. This pattern stops as soon as a connection is made via Bluetooth or USB.

    • The battery percentage will display on the top left of PF Pay. If it reads NAN% the reader is dead.

  3. Hard close/turn on and off the iPad and try again.

Stripe Reader is low on battery and disconnecting

Plug in your stripe device to a charger while running payments.

  • When your Stripe device is below 25%, you will begin getting warnings to plug in your device.

  • When your Stripe device is below 20%, it will begin to disconnect automatically. Please plug in your device to a charger while taking payments.

Customer received an Error when trying to use their card

  1. Try the opposite method
    If they tapped their card and received an error, have them insert it instead (or vice versa).

  2. Try a different card or manual entry
    If the error happens again, ask the customer to try another card.
    You may also manually enter the card number if needed.

  3. Check for a bank decline
    Sometimes a customer’s bank may flag the purchase—this often happens when they are buying something outside of their home state.
    In this case, ask the customer to check their phone for a text or email from their bank asking them to confirm the purchase.

Slow or Laggy App

Check how your cellular and wifi are performing in the app.

  1. Use the Hamburger Menu to open up the PF Pay menu.

  2. Under the Device Settings header, select the Settings button.

  3. Under the Internet Connection header, press Run Speed Test, and see how your Connection Quality is.

  4. If you have good wifi turn off your cell in iPad setting, vice versa with for good cell and not good wifi.

  5. If you have no good connection reach out to your Brand Leadership for next Steps.

Using a Portable Charger to Charge your Stripe Device

What you'll see

What to do

Use the circled USB-A port. Don't use the block's built-in cable for the device.

Charge the block: It is highly suggested that the cable built into the block be used only to charge the block, not the Stripe device.

  1. Plug the block's connected USB-C cable into a wall adapter or a powered USB-C port.

  2. Let the block charge fully before your event so your PF Pay device has power all day.

Charge your Stripe device:

  • Do: plug your device's own charging cable into the rectangular USB-A port (circled).

  • Don't: use the cable built into the block to charge your Stripe device.

Stripe Reader Information

The four status lights on your Stripe reader tell you whether it's on and ready to connect.

What you'll see

What to do

Stripe reader status lights at a glance

  • Turn it on or check if it's on: Press and release the power button once. If it turns on, the lights will glow for 2 seconds and the reader will beep twice.

  • Check the battery: While the reader is on, press and release the power button once. Each light that turns on equals 25% charge.

  • Keep it charged: Try to keep the battery above 50%, or plug it in via USB-C and charge it for at least 30 minutes. A low battery can sometimes mute the reader's sounds or cause it to act unpredictably.

  • Turn it off: Press and hold the power button for 4 seconds, then release.

Still need help?

We're here for you. Reach out to the PlayerFirst Support team and we'll do our best to get you up and running.

Phone: (781) 722-0333

Attachment icon
Attachment icon
Attachment icon
Did this answer your question?